triumphs
[Top] [All Lists]

Re: [TR] TR-3A Stoneguard question

To: "wbeech" <wbeech@flash.net>, "TR List" <triumphs@autox.team.net>
Subject: Re: [TR] TR-3A Stoneguard question
From: "Geo & Kathleen Hahn" <ahwahnee@cybertrails.com>
Date: Sun, 9 Dec 2007 12:05:37 -0700
I had a problem fitting the stoneguards as supplied by TRF.  All I really 
needed to replace was one of the large ones (kerb!) but thought what the 
heck, do the whole set.  The fitment difficultly I had was with the small 
pieces.  The one on the left is from TRF, the one on the right came off the 
car -- I had installed it about 7 years ago, it came from Vicky Brit.

http://www.cybertrails.com/~ahwahnee/Stoneguards.JPG

It was that bowed front edge you may see on the TRF one that was going to 
require some tweaking.  Rather than mess with that I kept my old small ones 
and ordered just the one big one I really needed to replace from Moss (they 
sell the individual pieces).

BTW -- TRF was very good about accepting the return (all still in the blue 
plastic sheathing). This isn't meant to slam or recommend any particular 
vendor, these have always been troublesome repro parts in my experience.

Geo Hahn 
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>