Hi Roger,
I wrote an article for my local club newsletter describing the rebuild
process for a TR6 fuel pump. I have attempted to put some of the pictures at
http://s200.photobucket.com/albums/aa68/gmark_01/Fuel%20Pump/?action=view&cu
rrent=e9be68b7.pbw
showing my methods. This may help you when doing yours.
> Subject: [TR] Fuel Pump rebuild
>
> I have an original fuel pump with the priming lever that I would like to
> rebuild. I have purchased a rebuild kit. One of the valves I can get
> to from the back with a punch, but not the other one.
>
> Does any one have a good trick for getting the valve out? Any other
> tips for rebuilding it?
>
> I know there are reproductions available, but I wanted to give this a try.
>
> Thanks,
> Roger Elliott
> 1968 GT6
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|