>From looking in the TR2/3A, 4/4A manuals, they show the lower A arms with
>zerks at the outer and inner connections with the trunnion. The 6 manual does
>not indicate these fittings. I have several different A arm arrangements in
>my misc. parts bins---some with zerks per the manual, some with zerks at both
>inner and outer ends, and some without any at all. The NOS arms I obtained
>have nothing. I am assembling a 6 front suspension on my 55 TR2 and seem to
>remember a post showing how to fit a pressure oil can to feed zerks on rebuilt
>suspensions using neoprene or equal bushings. What are the opinions out there
>on oiling vs greasing vs nothing in modern suspension rebuilds? Would
>appreciate all input before I drill and tap new A arms.....thanks.
Planning & Development Services
A. Daniel Cronin
248 761-2673
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|