triumphs
[Top] [All Lists]

Re: [TR] TR6 Jacking Point

To: suhringtr36@comcast.net, triumphs@autox.team.net
Subject: Re: [TR] TR6 Jacking Point
From: TR250Driver@aol.com
Date: Mon, 3 Dec 2007 14:08:20 EST
In a message dated 12/3/2007 6:59:12 A.M. Eastern Standard Time,  
suhringtr36@comcast.net writes:

Well, with the '70 TR6, I cannot jack this coming from the  rear
since there is not enough clearance due to the muffler's  position
 
I use the single point method front and back only because I invested in a  
really cool jack with a very low profile.  I bought it from Griot's  Garage 
years ago.  It is still available  product # 77739 @ 
_http://www.griotsgarage.com/catalog.jsp?&SKU=77739_ 
(http://www.griotsgarage.com/catalog.jsp?&SKU=77739)   
 Not cheap at $399 but it is the best thing since sliced bread for all these  
LBC's that sit so low.  It even works on me 70 Spit that sits like   5" off 
the ground or something.  You still need to do what Dave does and  jack the 
front up half way then go to the rear.
Cheers,
Darrell





**************************************Check out AOL's list of 2007's hottest 
products.
(http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>