In a message dated 11/30/2007 7:27:11 PM Central Standard Time,
jmitch@snet.net writes:
> I have a stock type stainless steel exhaust system on my TR6. It
> tends to resonate more than a mild steel system. Is there anything like
> a dynamat type product, that could be slapped onto the muffler to take
> some of the tinny sound out of it, and wouldn't melt? Any ideas would
> be appreciated. Thanks
>
I have expressed the same displeasure with the system on my car. I have not
done anything about it yet but due to the temperatures involved one is limited
on options. One thought I had was header wrap. Wrap the mubbler with this
high temp material and secure it with some very long hose clamps (or a number
of shorter ones in series). If the material can be held in intimate contact
with the muffler it should dampen the resonances pretty effectively.
Dave
71 TR6 (and others)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|