triumphs
[Top] [All Lists]

Re: [TR] TR3A Alternator Conversion Bracket Problem

To: <tr3driver@ca.rr.com>,
Subject: Re: [TR] TR3A Alternator Conversion Bracket Problem
From: terryrs@comcast.net
Date: Sat, 24 Nov 2007 01:26:09 +0000
If you're near Ukiah or Potter Valley, you're near where I grew up.

Not sure what you mean by "single point."  Is that a reference to the upper 
bracket?


-------------- Original message -------------- 
From: <tr3driver@ca.rr.com> 

> ---- Bill & AnnaBelle wrote: 
> > I went through those problems, and I believe the solution is a 
> > matter of physical science. 
> 
> FWIW, I tried the "single point" mount, and found out the hard way that it 
> didn't work very well. My solution was virtually identical to Bill's (except 
>I 
> kept the wide belt); and it worked very well for several years. Belt life 
>went 
> up noticeably. 
> 
> Randall - from a hotel room somewhere in northern CA 
> _______________________________________________ 
> 
> Support Team.Net http://www.team.net/donate.html 
> 
> This list supported in part by the Vintage Triumph Register 
> http://www.vtr.org 
> 
> http://www.team.net/donate.html 
> 
> Triumphs@autox.team.net 
> http://autox.team.net/mailman/listinfo/triumphs 
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

http://www.team.net/donate.html

Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread] Current Thread [Next in Thread>