I have just finished installing the center support bracket you describe on
my TR4. You can find a diagram on page 1-402 of the workshop manual . It
required removal of the console with the exhaust already in place. It uses two
brackets & a longer bolt, all offered by Moss.I am still working on the back
part to clear the frame tunnel issue.I hope this helps !
Jeff Kimbrell
1962 Triumph TR4
Marietta, Ga.
**************************************Check out AOL's list of 2007's hottest
products.
(http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|