I got that same bracket and for the same reason... after studying it I
decided to wait until the next time the gearbox was out to install it. It's
now in but I have no pics. If it is the same bracket I'm thinking of it has
a nut welded to it that replaces the nut on the righthand bolt holding the
rear mount of the gearbox... the big bolt with a 13/16"(?) head. I do not
think you can get that thing bolted up w/o removing the tunnel, the dash
support and possibly more, but I could be wrong.
It did help secure the exhaust (a bit) though what helped more I think was
adding a strap mount between the 2 mufflers, there was even a bracket on the
frame in the exact spot I needed one.
I do not know if a TR3 middle exhaust mount would work (don't see why not)
you might find it is easier to retro-fit without removing stuff.
Geo
----- Original Message -----
From: "Brian Jones" <banc8004@comcast.net>
> Could someone please send me a photograph of the front exhaust
> bracket in place on a TR4. This is the bracket that connects the
> front pipe to the gearbox. This bracket was missing on my car, and
> the bumping of my exhaust is taking the shine off my ride. None of my
> books show the bracket in place, that I can find.
>
> I'm hoping the bracket just received from Moss cures the issue.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|