Slowly piecing together my GT6-3, sitting now for two years. Engine is
running but the mixture adjustment screw in one of the dashpots refuses to
move. I'm afraid much to force it. The adjuster in the other carb is
sticky, but turns.
I'm assuming this is just a little rust in the threads, and I have filled
the dashpot with PB Blaster to soak the screw. Does this problem sound
familiar?
==
Martin Secrest
73 GT6
72 TR6
Arlington, VA
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|