On Monday 12 November 2007 10:29 am, Paul Dorsey wrote:
> My TR3's radiator's neck is rubbing the aluminum tie-bar. Is this
> necessarily bad?
>
> Thank,
> Paul Dorsey
> TR3
Paul,
Unless I have something screwed up (which I dont think I do), there should be
about a 1 3/8 inch gap between the top of the neck and the bottom of the
tie-bar at that point. I just measured it a few seconds ago.
Other listers may want to chime in on this since I do have an after market
(TRF) front apron.
Do you have a stock radiator?
Also, since I have the bonnet open, would you like a photo or 2 showing the
gap as best I can before I go back and put the 3 to sleep for winter for the
last time?
Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|