--===============0748157481==
Content-Type: text/plain; charset="windows-1250"
Content-Transfer-Encoding: 7bit
I agree with your guess, the bead protrudes about 1/8" so if you get to 1/4"
on each side that will give you a finished clearance of 1/8".
Bill B
'58 TR-3A TS/30766 L
"I love it, she hates it... the car, of course!"
-----Original Message-----
From: triumphs-bounces+wbeech=flash.net@autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net@autox.team.net] On Behalf Of Paul
Dorsey
Sent: Saturday, November 10, 2007 7:06 AM
To: list Triumph
Subject: [TR] Fall into the GAP
How wide should I make the gaps on the sides of the bonnet? (This would be
before any beading or beading-cover is put in.)
I'm guessing a 1/4" on each side of the bonnet, but then, I've never owned
or rebuilt a Tr before.
Thanks, Paul Dorsey
60 Tr3
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
No virus found in this incoming message.
Version: 7.5.503 / Virus Database: 269.15.28/1122 - Release Date: 11/10/2007
10:41 AM
Version: 7.5.503 / Virus Database: 269.15.28/1122 - Release Date: 11/10/2007
10:41 AM
--===============0748157481==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
--===============0748157481==--
|