Car powered by Beryllium sphere, Tim?
-----Original Message-----
From: triumphs-bounces+mhooper=digiscreen.ca@autox.team.net
[mailto:triumphs-bounces+mhooper=digiscreen.ca@autox.team.net] On Behalf
Of Tim Gaines
Sent: November 8, 2007 10:15 AM
To: TRIUMPHS@autox.team.net
Subject: Re: [TR] electronic ignition,
Actually I have opened the box and found lots of empty space, one
capacitor, one ???? embedded in the case (maybe a transistor?), and
one "secret" insert with a warning about berillium (sp?). I don't
have much idea what any of it does unless a transistor is switching
voltage on and off in response to some input.
Tim
>Yes, the box needs to be grounded. As well the steel leads need to be
>clean.
>
>If you're inquisitive, you can open that box and admire the bone stock
GM
>HEI ignition module sitting in it.
>
>And as long as you're there, you can question my Triumph or Lucas or
>whomever decided that the GM ignition needed a bunch of other gee-gaws
>installed onto it. Personally, I disconnected the various capacitors
and
>resisters and such. Most were corroded into non-functionality anyways.
>
>----- Original Message -----
>From: "Tim Gaines" <mtgaines@mail.presby.edu>
>To: <TRIUMPHS@autox.team.net>
>Sent: Thursday, November 08, 2007 7:57 AM
>Subject: Re: [TR] was ballast resistor/ electronic ignition,now I was
wrong
>and an apology
>
>
>> ground problem. Am I correct in assuming that the module body is
>> supposed to be grounded. I am going to try for a more permanent fix
>> for this problem (not working right now again), but I want to be
> > sure that grounding is the proper course of action.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|