Thought I had a handle on this--and despite the small bit of dripping I get
under the TR3 that is possibly due to synthetic--I have been using Valvoline
fully synthetic engine oil.
On a diesel website, however, I got this new piece of information I don't
remember being discussed yet on the List. It's quoted in the next paragraph:
The bottom line on Synthetics is that they give superior lubracation, BUT they
don't Suspend and therefore do not carry dirt away to the filter very well.
When Mobil 1 first came out, the FAA allowed their use for piston aircraft
engines. After they saw what was happening, they banned their use. However, if
you mix synthetic and crude oils together, you get the best of both worlds.
Don't buy the blends, they contain two little of the synthetics. A 30 or 40
percent Synthetic blend is a good blend. Good for you car too.
My question is how this could be? If particles are not in suspension, they are
in the bottom of the oil pan, not doing damage. If they are in suspension, or
if they get picked up off the bottom, they wind up going through the filter.
Right? ...Or is there something to the paragraph above?
Terry Smith, '59 TR3A
New Hampshire
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|