John,
I could not even break mine free with an impact wrench. So, I went to Lowes
and bought a 3' length of angle iron and drilled two holes near one end that
meet up with two threaded holes where the fan mounts. I bolted this on to
the extension and lowered the block to the floor. Using the weight of the
block to my favor and the angle iron lever against the floor, I put an iron
pipe
on the end of a breaker bar and broke that bugger free.
It was actually quite easy.
David Lylis
69 TR6 CC26160L
60 TR3A TS74461LO
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|