Hello all,
Been a while since I posted, but have a quick question on an annoying tidbit
on my 59 TR3A. The steering wheel is not centered when the wheels are
straight. Obviously I put the wheel back on off center. Straight shaft, not
split column. I know that you need to pull the stator tube to get at the nut
holding the wheel. Hence my question. Is it possible to loosen the gland nut
retract the tube far enough without disconnecting the wires from the lamps to
get to the nut holding the wheel. Then remove the wheel enough to turn it and
lock it. I am really trying to avoid disconnecting the lamps and extracting
the entire stator tube.
Alex
59 TR3A -well on the road in sunny Florida
72 TR6
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|