Hi Jim,
Yes, You're safe to conclude that You have the Metric Calipers and that
You need the late style Bolts with the 12 mm. Shank.
Regards,
Wayne
----- Original Message -----
From: "james mc arthur" <jrmcarthur@verizon.net>
To: <triumphs@autox.team.net>
Sent: Thursday, October 04, 2007 4:14 PM
Subject: [TR] caliper bolts revisited
> Good day to all and many thanks to all that replied to my original
> post.
> I have made a trip out to the garage and here is what I found; now I'm
> more
> confused. The outer casting, the side facing me has "type P" stamped into
> it, while the back side has"type PB" stamped into it. I measured the
> inside
> diameter of the mounting hole in question and it measures a tad over 12MM,
> or 15/32". Am I right to think that I do indeed have metric calipers,
> regardless of the stampings, based on the fact of the 12MM dimension? As
> always, many thanks in advance..........Jim McArthur/ CF17672U
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|