> Alternately, has anyone found anything that will work as a
> substitute?
Haven't done it myself, but it should be easy enough to fabricate them from
shim stock (available from any industrial or machine supply place, like
McMaster-Carr
http://www.mcmaster.com/ or Enco
http://www.use-enco.com/CGI/INPDFF?PMPAGE=685&PMCTLG=00
Or, MMC will sell you pre-made shim washers (which would be more trouble to
install but save having to cut them out).
Randall
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|