Thanks Randal and Leighton! Once again the list's help is indispensable.
Mike Denman
----- Original Message -----
From: "Randall" <tr3driver@ca.rr.com>
To: "'Mike Denman'" <mikedenman@sbcglobal.net>; "'Triumph'"
<triumphs@autox.team.net>
Sent: Monday, September 17, 2007 1:45 PM
Subject: RE: [TR] TR3 clutch master cylinder
>
>> Does anyone on the list know the bore diameter of the TR3
>> clutch Master
>> cylinder? I am referring to the clutch master cylinder that
>> is separate from the reservoir.
>
> Should be .75".
>
> Randall
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|