A couple of dumb questions.... The metal pipe that goes to the bottom radiator
hose on a TR3. My old pipe had rusted until a hole appeared so I ordered a new
one from Moss. The new one is longer than the old one so the first question
is; is the new pipe the correct length and the old pipe was cut for what ever
reason by the previous owner or does the new pipe need to be trimmed? I
haven't actually tried the new pipe on the car yet to see what the length
looks like installed. Also, I assume that the bend in the pipe goes toward the
bottom, correct?
Mike Denman
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|