I am trying to separate the thermostat housing from the capillary tube.
Service Manual says "remove the glad nut". This I have done but the temp
sending unit on the inside of the housing will not budge. It does not appear
to be
excessively corroded, in fact is quite neat and clean in there. I do not
want to damage it with too much force. Any tips?
David Lylis
69 TR6 CC26160L
60 TR3A TS74461LO
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|