Hi Listers,
I am trying to replace the hand brake on our 1970 TR6, the
old one failed when the action rod pushed through the rubber "button"
and locked the brakes ON ... I had to remove the pivot bolt to get
them free. It was then I discovered the old hand brake was from a
TR4. I found a "correct" TR6 hand brake from a donor car (original)
and all went well until I tried to reattach the brake cables ...
there is simply not enough slack to do that ... and the cable
must turn 90 deg to enter the Y connector. I released one of the
cables from the rear drum attachment point but still could not get it
to work.
Any help is clearly appreciated ...
--
Bill Pugh
1957 TR3 TS16765L
aka
Casper
AnnaBelle Pugh
1970 TR6 CC59179L
aka
Rosey
Wallace, CA
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|