I believe your refering to the water pipe that is molded into the 72-76
intake manifold.
There really is no cost effective way to repair a pipe that has rusted away
on the ends , other than to replace the whole intake.
You could run a rubber hose and by pass the intake, if replacing the intake
is not an option.
Al Salvatore
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|