I actually built a skid plate for my TR3A last winter. I used .040 aluminum
and it covers from the radiator to behind the pan. It is attached to the
frame rails with metal screws. However, it doesn't protect the pan since
the pan protrudes through it an inch or so. I did it to confine air flow in
the engine compartment. It worked like a charm.
Best regards,
Tom
_________________________________________________________________
Learn.Laugh.Share. Reallivemoms is right place!
http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|