On Monday 20 August 2007 05:34 pm, Paul Dorsey wrote:
> I need to hook up the wires on my heater. I think there are only two- (is
> this right?) I cut the terminals heads off them and I forgot which wire
> goes to the battery (I am still positive ground). I'm not much of a
> beter- but, I bet it doesn't make much of a difference!
> I also lost the control switch. But, I think I've got something to use
> as a replacement. It is a one-speed heater isin't it?
>
> Thanks,
> Paul Dorsey
> 60 TR3A
Paul,
The motor is wound so it is not ground specific.
The original switch is a rheostat to allow you to run the heater in slow speed
or slower!
The motor and 4 bladed fan does not push that much air, maybe enough to heat
one side of the car and when the heater doors closed demist the windshield.
The 4 heater is much better for both applications.
Bob
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|