Quite possibly. I used the seals from TRF on my TR4 (the separate fuzzy
seal & rubber seal, both identical to original). I don't think mine were as
bad as yours as I did not have to realign anything to get the door to close
but I did have to slam it pretty good.
After a year or so all was back to original with closing requiring no more
effort than closing a refrigerator door. Over time the rubber seal has
become noticeably depressed.
Okay -- after rereading that I can see some wiseacre tellin' me to get that
seal into counseling.
Geo
----- Original Message -----
From: "Glenn Owen" <mgowen55@hotmail.com>
To: "'Triumph List'" <triumphs@autox.team.net>
Sent: Friday, August 17, 2007 1:17 PM
Subject: [TR] TR4A New Door Seal Problem
> If I keep the doors closed against the new seal, will the fit improve? Or
> is
> there a trick to getting a good fit with the new seals?
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|