For the curious & for the archives... here's the follow-up to my queries on
fitting a TR3A tonneau with the 'slash' behind the seating area. In the end I
fitted a quarter-inch grommet in the under-flap to hold it on the Lift-the-Dot
peg:
http://www.cybertrails.com/~ahwahnee/Tonneau-A.JPG
The grommet is thin enough to then snap the LTD of the upper portion over it:
http://www.cybertrails.com/~ahwahnee/Tonneau-B.JPG
As you see, the grommet is brass w/o nickel plating, but it really doesn't
show either when the toneau is in place or tucked away so I don't think that
matters much.
Thanks to all those who helped with pics & advice.
Geo
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|
