> My workshop manual says to orient the pistons according to a 1/32" split in
> the skirt. My new pistons have no such split, nor did the old ones, and
> there is no indication on the crown of the piston as to how these should be
> oriented relative to the bearing caps, etc.
In that case they can go either way.
Randall
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|