Hi Brian, I used a floor jack with a 2X4 on the saddle to support the
back end of the door while I fiddled with adjustment. It really is
trial and error and it's not a fast and easy job. It took me at least 4
hours per door, mostly because I'm a perfectionist.(not a good thing to
be with a Triumph:). John Mitchell 76 TR6
Brian Induni wrote:
> Hello all,
>
>
>
> I'm finally re-assembling my TR4a after being apart for 30 years, and was
> looking for some tips on hanging the doors. I understand which bolts to
> loosen to adjust vertical and in-out, but it's nearly impossible to open the
> door, loosen, move, tighten, and close the door to check if you've made the
> correct adjustment! Any help, tips, suggestions would be greatly
> appreciated.
>
>
>
> Brian
>
> 1967 TR4a
> _______________________________________________
> jmitch@snet.net
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
> Triumphs mailing list
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|