I have used a nut splitter succesfully quite a few times now. I place it as
far onto the sleve as I can, tighten till it starts to
split the sleeve and then use the tool as a lever to tist the now slightly
larger diameter sleeve off. It has never left a mark on
the underlying pin and works very quickly.
Edward Hamer
Petaluma CA
_______________________________________________
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
|