I almost forgot in wiring my console; what wire/gauge may I 'tap' in order to
get 12v power for accesories (not that I have any; although I've got a Lucas
65watt alternator in a box somewhere to install a year from now).
Typically, you can get 12v that's always hot and 12v that's only hot with
the key switch on. I don't know what I'd prefer; seems like 12v only hot with
the key on might save the battery. BTW, what does leaving the switch on do if
you have electronic ignition? (not that I have that either, but, maybe in
about two years...
Any other wires I've forgotten...for a stock setup? Maybe Dan Master's
non-stock setup in about three years....
Thanks,
Paul Dorsey
60 tr3
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|