Randall, do either of the two listed here with JC Whitney look okay as RFI
suppressing, metal core spark plug wires?
http://www.jcwhitney.com/autoparts/Search?catalogId=10101&storeId=10101&sku=spark+plug+wire+rfi+suppression
As ever, thanks for your help. ...And Oh, I found the Bosch WR7BP on Amazon
dot com.
Terry
-------------- Original message --------------
From: "Randall" <tr3driver@ca.rr.com>
> > And is
> > there a recommended resistor plug?
>
> I used Bosch WR7BP (which is a platinum resistor plug) in addition to the
> solid wires with resistors in the cap.
>
> Not sure, but I think what I suggested before is what I would suggest now :
> Try one, and if that's not enough, add the other one.
>
> Note that it is possible for alternators to put out electrical noise as
> well. If you can't kill the noise at the plugs, you might try temporarily
> running with the alternator disconnected electrically (usually just pulling
> the small plug out so it doesn't charge, no need to disconnect the main
> wire), and see if the noise disappears.
>
> Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|