But do a trial fit on the bench before installing the pump. Some repro
pumps need a bit of material ground off the casting else the pulley will not
turn w/o scraping.
BTW -- There are now new pumps available that have a functional grease
nipple and take the original pulley.
Geo
----- Original Message -----
From: "Randall" <tr3driver@ca.rr.com>
>
> Oops, sorry, missed that. If the replacement comes without a pulley, the
> original pulley should fit.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|