Whenever I have had to remove it, I have never had a problem. All I had to
dp id insert a putty knife between the emblem and the tape and wedge it off.
Then you can remove the tape by just pulling it off. It it is stubborn or
leaves some gum behind, you can use some Auto Rinish cleaner (such as PPG
Acryli-Clean, or NAPA Fin-L-Wash) to clean off any remaining trace of the
adhesive.
Joe
----- Original Message -----
From: <Dave1massey@cs.com>
To: <triumphs@autox.team.net>
Sent: Thursday, February 15, 2007 3:23 PM
Subject: Re: [TR] Re: 3M double stick trim tape for Installing the 7 Lettres
TRIUMPH
> In a message dated 2/15/2007 1:33:26 PM Central Standard Time,
> spitlist@cox.net writes:
> > Then
> > when it is attached, you rip off the backing and stick it on. You can
> > remove it but it will not separate like that household stuff does.
>
> Cool. Should have known the automotive industry would come up with
something
> better.
>
> >
> > You will have to cut another piece of tape in order to re-attach the
piece
> > if you ever nedd to replace it.
>
> So, how do you remove it? Pry it off? Can heat be applied to soften the
> adhesive?
>
> Inquiring minds want to know.
>
> Dave
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|