I have the Goodparts solid rack mounts in my TR6 along with his front busings,
springs, sway bar, and a set of Spax shocks (set to maximum firmness). I
haven't noticed any additional vibrations, noise, etc due to the rack mounts.
I'm sure there is some, but it isn't obvious. And I suspect that the rubber
joint remaining in the steering column absorbs quite a bit preventing it from
reaching the steering wheel. I highly recommend the solid rack mounts.
- Greg H
Date: Sun, 11 Feb 2007 10:36:19 -0500
From: "Bob Rochlin" <r_rochlin@hotmail.com>
Subject: [TR] TR6 Solid steering mounts
Could someone who has experience with the solid rack mounts from
Goodparts comment on how it affected the transfer of road vibration to
the
steering wheel.
Thanks.
Bob Rochlin
'72 TR6
---------------------------------
Looking for earth-friendly autos?
Browse Top Cars by "Green Rating" at Yahoo! Autos' Green Center.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|