> Do not just go
> buy 3/8 rod. I had to look at a lot to get one that was 3/8
> and round for 3 - 4".
The reason for that is that hardware store rod is soft and bends easily.
Proper drill rod will be round and hard (even in the supplied annealed
form).
Eg, P/N 8890K42 at
http://www.mcmaster.com/nav/enter.asp?pagenum=3533
Randall
CONFIDENTIALITY. This electronic mail and any files transmitted with it may
contain information proprietary to NavCom Technology, Inc., or one of its
affiliates, and are intended solely for the use of the individual or entity to
whom they are addressed, shall be maintained in confidence and not disclosed to
third parties without the written consent of the sender. If you are not the
intended recipient or the person responsible for delivering the electronic mail
to the intended recipient, be advised that you have received this electronic
mail in error and that any use, dissemination, forwarding, printing, or copying
of this electronic mail is strictly prohibited. If you have received this
electronic mail in error, please immediately notify the sender by return mail.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|