Thanks, Eric. I'll give them a try.
Tom
>From: "Frenken, Eric" <efrenken@lctax.de>
>Date: 2007/02/09 Fri AM 09:02:01 CST
>To: Tom Note <tom628@verizon.net>, triumphs@autox.team.net
>Subject: Re: [TR] Distributor springs
>Hi Tom,
>
>here you go:
>
>http://www.southernsprings.co.uk/download-frame.htm
>
>Eric
>Heinsberg/Germany
>123ignition dealership
>www.brits-n-pieces.com
>
>
>Tom Note wrote:
>
>I'm trying to sort out some problems with excessive pinging at mid range rpm
>in my '76 TR6.
>
>As a start, I'd like to replace the present advance springs in the dizzy,
>since I don't know if they're oem, or if the PO was playing around with the
>adv. curve. Anyone know of a source for stock adv. springs? I don't see them
>listed in the catalogs I have.
>
>Also, do any of the vendors carry a selection of advance springs?
>
>Finally, is there a formula for calculating the spring rate, knowing the wire
>dia., no. of coils, etc.?
>
>Thanks,
>
>Tom
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|