> Leaning on my experience with grease seals in garages as a teenager I alway
> put the felt against the bearing. Then lay a flat object, 2x4, accross the
> metal and drive it into the hub. Supposedly this seals the grease in the
> hub.
Might have been true for the cars you were working on then, but it's exactly
backwards for a TR2-6. The felt goes against the vertical link, where it
doesn't seal the grease so much as it helps keep dust & dirt out of the hub.
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|