Re: [TR] Valve adjustment for "mild street cam"..TR3

[RICK ORTHEN <peketzu@verizon.net>]

Tom et. al.  FWIW, one should check whether the spec is "hot" or "cold" . . . 
when I bought an Isky cam, they confirmed their spec was 0.016" hot.  They also 
went on to tell me to add 0.002" to the hot spec to convert to cold clearance.  
I prefer to adjust valves on a room temperature motor.
   
  Rick O.
  72 TR6


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org