TRsick@aol.com wrote :
> A simple test to
> see if your powder coat is cured correctly. Take a rag slightly dampened
> with MEK or even acetone. In an area that might not be so obvious
> take the damp
> rag & swipe it lightly (about 20 swipe passes) over the cured
> powder. If the
> finish gets dulled or any discoloration, the item is not cured correctly. If
> no damage, you got a good powder job.
Thanks for the tip, Bob. Since it was really tough to sort out your reply from
Paul's post, I thought I'd repeat it (above).
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|