Ok I give up, what is the secret of fitting the petrol tank?. When I put
everything in position, the extension filler, the tank, but without the
rubber
hose that joins the two, the gap between the extension and the neck of the
tank
is about an 1/8". If I fit the hose to one or the other before fitting I can
see
no way of manipulating the hose into position on the other, if you follow.
Could
someone tell me the order of this job, and is it as difficult as it looks?. I
could always cut off the rear deck, fit the extension and lower the whole lot
back in position : )
Thanks as always in advance
John
1954 TR2 (long door)
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|