> I had a hard time
> making the wires slide up and down easily with the
> adjustment of the wheel, so I stretched them carefully
> together and used full length heat shrink on the wires to
> make one umbilical cord.
FWIW, the factory wires had a woven cotten outer covering that IMO would
slide even easier than PVC heat shrink.
> I used my pistol bore brush on a
> rifle cleaning rod on my electric drill to clean and buff the
> full length inside the tube. I applied dry graphite as a
> lubricant, and all works great now.
Both good ideas.
Randall
CONFIDENTIALITY. This electronic mail and any files transmitted with it may
contain information proprietary to NavCom Technology, Inc., or one of its
affiliates, and are intended solely for the use of the individual or entity to
whom they are addressed, shall be maintained in confidence and not disclosed to
third parties without the written consent of the sender. If you are not the
intended recipient or the person responsible for delivering the electronic mail
to the intended recipient, be advised that you have received this electronic
mail in error and that any use, dissemination, forwarding, printing, or copying
of this electronic mail is strictly prohibited. If you have received this
electronic mail in error, please immediately notify the sender by return mail.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|