jimmuller@rcn.com wrote:
>>> I know there were a couple of different TR4 manifolds;
>>> are the interchangeable?
>
>> Exhaust or intake?
>
> I wouldn't think they are interchangeable. One points up and the other
>points down. Not the same at all.
That was good for spraying tea over the keyboard & screen. In the
future, I'll try to remember to read Jim's postings in between sips of
tea and not during.
> Jim Muller
> without a TR4 manifold
I don't have one either :)
BTW all the TR3-4A intake manifolds will bolt to all the high port heads
and all the exhaust manifolds will do the same. But as Jim pointed out
it is not a good idea to switch between intakes & exhaust.
Though it would be interesting to see a four tube exhaust header
standing up a foot or more above the bonnet pointing to the front with a
big 2-1/2" SU sitting on the collector face into the air stream. It
would be the ultimate ram air set up with really long intake runners for
low end grunt ;)
TeriAnn
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|