Hello Listers,
I'm ready to connect a new stereo head unit on my '74 TR6 and (being somewhat
of an electronics simpleton) have a question: on the connection harness
supplied with the Pioneer head unit, there is a yellow wire tagged "to
battery." This is an "always on" connection to preserve radio pre-sets and
clock settings. The installation instructions for the head unit say NOT to
run the yellow wire through the firewall into the engine compartment. I
assume they want the connection made on the cockpit side of the firewall.
What is the safest way to make this connection i.e. what wire should I connect
this yellow "always on" lead to? The other leads are: red - to ignition
"Aux/Accessory" contact, black - ground, and blue - to amp remote turn on. As
always, thank you all for sharing your incredible body on knowledge/experience
with the list.
Bruce Cairns
'74 TR6
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|