Chad,
I think BPNorthwest.com sells 1" lower uprated springs. Pretty sure you can
buy front & back separately too
Cheers,
Todd Bermudez
From: Greg Perry <rgperry@earthlink.net>
Reply-To: Greg Perry <rgperry@earthlink.net>
To: Chad Jester <triumph74tr6@yahoo.com>, triumphs@autox.team.net
Subject: Re: [TR] TR250 Rear Springs - recommendations
Date: Thu, 9 Nov 2006 07:08:51 -0600 (GMT-06:00)
Chad,
Did you check the rear camber before replacing the uprated springs? The
rear camber can raise and lower the rear of the car if it is not set
correctly. Ideally -1/2 inch camber setting with +/- 1/2 inch margin.
Richard Good produces/sells the lowering 1" springs and spacers to adjust
height.
http://www.goodparts.com/
Greg Perry
>List-
>
>I need some info on rear springs for my 250. The PO
>put TRF uprated springs on it, but they sent the
>rearend to the moon....looked ridiculous. I put the
>stock springs back in and it looks better, but I would
>really like to lower the rear of the car about 1".
>Could anyone recommend some springs for this? TRF
>sells a set (front and rear) that lowers 1", but I
>only want to drop the rear. The front sits just fine
>the way it is.
>
>TIA
>
>Chad
_________________________________________________________________
Try Search Survival Kits: Fix up your home and better handle your cash with
Live Search!
http://imagine-windowslive.com/search/kits/default.aspx?kit=improve&locale=en-US&source=hmtagline
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|