[TR] Re: Hinge Pin Removal Tool

["Eureka Saws Co, Inc." <ambritts@ptdprolog.net>]

Hi Bill,
Sure does. That is why you need a small one. The crank handle needs to turn
without hitting the car. All you need to do is get it started out. Then a pair
of needle nose will pull the pin.
Alex
  ----- Original Message -----
  From: Bill Brewer
  To: Eureka Saws Co, Inc.
  Sent: Monday, November 06, 2006 10:21 PM
  Subject: Hinge Pin Removal Tool


  Hey Alex,
       Can you email me the jpegs for your C-clamp hinge pin removal tool.
       Does it work with the hinges still on the car?

       Thanks,

       -Bill


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org