RE: [TR] Question about a starter bench test

["Randall" <tr3driver@ca.rr.com>]

> Just need to refresh my memory.  Isn't the starter bench test done by
> attaching a battery negative to the lower post on the solenoid and battery
> positive to the top post and then using a screw driver, bridge from the side
> lead to the positive top post when the starter will engage and turn?

The negative lead needs to go to the case of the starter.  Otherwise that's
correct (except I'd use a clip lead rather than a screwdriver <g>).

Randall


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org