> If I had to guess I suppose the "open" side would be pushed
> in first - that way the seal would end up being totally
> enclosed. (The "open" side would be in contact with the
> metal of the recess - if that makes sense.)
Nope, goes the other way. "Open" side towards the inside of the engine.
> At the good advice of a list member, I ordered a 1/2 ton
> press from Horrible Fright ($30 + $8 shipping) but now I'm
> anxious to get started. What do you think my chances are of
> successfully "tapping" the new one place (using the old one
> as a drift).
Should be no problem, I used a block of wood on mine.
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|