-------------- Original message --------------
From: Jim and Andreas Vassiliadis <diggle@clear.net.nz>
> Brake Booster or Vacuum power servo,
>
> What car's could I get a brake servo from to install into my 1962 TR4.
This is a relatively common conversion for TR4 vintage racers who need to
convert to a dual circuit brake master cylinder and are trying to save some
$$$. You use the master cylinder with power booster from a TR6, but to do so,
you also need the TR6 peddle assembly. Another requirement is that a 3" hole
needs to be cut in the firewall, which then needs to be reinforced around the
hole.
The TR4 parts manual shows that back in the day, there was a booster available
that fit the TR4. I have seen it referred to as "Moto-Vac" and as "Power Stop"
vacuum servo kit (part #514600). I have never seen one.
HTH,
Irv Korey
74 TR6 CF22767U
63 TR4 VSCDA Group 2 #58
Highland Park, IL
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|