Hi folks,
Well, I'm making good progress so far.
Removed apron, radiator and fan.
According to Haynes the next step is to "undo the starter dog bolt".
I'm thinking this is where I position an extension on the socket and then crank
the engine with the starter. I've positioned the extension under the frame on
the lower right hand side:
http://i12.photobucket.com/albums/a241/AdrianJones34/Dogbolt.jpg
because (to my thinking) the engine turns clockwise (?) -looking from the front
- so the extension must be positioned so that it doesn't move when I hit the
starter button.
Kind of a scary setup so I thought I'd better check with you guys first.
Many thanks for advice, Adrian TS58324
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|
