Jim,
ISTR that you have to engage overdrive with a lever under the bridge
pieces and then turn the output shaft until the two sets of splines
are aligned . Once aligned you let go of the levers and tap the
bridge pieces to lock everything together.
Good luck,
Mike
http://mikek.9online.fr/index.htm
> So..........on attempting to mate it to the overdrive unit, even
> though I had specifically taken care to align the splines within it,
> they are now misaligned and I can't put them together.
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|